This article show a wiTech MicroPod 2 v17.04.27 free download link,it can work perfect on wiTech MicroPod 2 Clone. What is wiTech MicroPod 2? WiTech MicroPod2 is a vehicle diagnostic software that diagnosing and programming for Chrysler, Dodge, Jeep, and Fiat (North America). This software was quickly replaced with the wiTECH Application called the wiTECH Desk Top Client. As mentioned earlier, the Star Mobile Interface could be used for the wiTECH application for most of the existence of wiTECH. The wiTECH VCI Pod is an interface that came out at the same time as the wiTECH application. Once the wiTECH Installer has been downloaded to your PC, double click this file to install the new version of the wiTECH application. Watch the installation video Click the thumbnail on the right to watch a guided tour through the installation wizard. Download “wiTECH Software Installer” located under the “General” section of the wiTECH Information page on DealerCONNECT. Note ‐ Be sure to download and save this file to your desktop before installing the “wiTECH Software Installer” application. Double click on the download “wiTECH Software Installer” exe file then.
Here is the original Witech micropod 17.03.10 software to use with an original or a micropod 2 clone.
https://mega.nz/#!BNAjnAQB!AWiM7QTImGt5n0XvgqNLF6rZ87gFQ4GqC9rl4dOtYcY (No pass)
Installation tip: if you run all the prerequisite software first it works…adobe air…java 6 -45…ect…
Try at your own risk!
Credits to transamb (mhhauto.com)
Chrysler, will force us to go to the version2 of the witech en so we must buy an new micropod (1850$)
but now you can use your old one a bit longer with this simple solution
you install the program and then you go to programfies (x86)/DCC Tools/WITECH/client here you delete the file app-config.xml
and you replace it with the file included in the download.
now you can start witech it will give you registration error , just close it and go on then you can chose to go offline or use techauthority subscrition and go on agan close registration error , and everything wil work fine , and you can use it as before
it will ask to update , but DONT
Test reports:
1) witech micropod 17.03.10 software original is tested working great with chines micropod sometimes you only have to reinstall it after a few days but im using it now 2 weeks on daily basis.
2). on line programming work with this solution, reflashed a 2010 charger
FAQ:
Q: if this crack is compatible with wiTECH 17.04.27?
A: no this one is only for 17.03.10
use iobit uninstall to uninstall 17.04 before you install 17.03
Q: Only work for me 1 week, i can’t start again. I try everything
A: uninstall it with this , and then restart computer and reinstall
https://www.iobit.com/en/advanceduninstaller.php
Related posts:
Here show you how to update original and crack wiTech Chrysler diagnostic software,hope it helps.
Preparations:
wiTech MicroPod 2 v17.04.27 Free Download
How to use Chrysler wiTech MicroPod 2 ?
How to Setup/Configure MicroPOD for wiTECH 2.0
Part 1:Original wiTech Chrysler Diagnostic Software Update Guide
1.Download “wiTECH Software Installer” located under the “Legacy Tools” section of the wiTECH Information page on DealerCONNECT.
Note-Be sure to download and save this file to your desktop before installing the “wiTECH Software Installer” application.
2.Double click on the download “wiTECH Software Installer” exe file then select “OK”.
3.Select “Next”.
4.Select “I accept the terms in the license agreement” and select “Next”.
5.Select “Install”
6.Select “Finish” and the “wiTECH System Installer Stub ‐ Software Manager” screen will be displayed.
7.Once the “wiTECH System Installer Stub-Software Manager” screen has been displayed. Please check the box for the software update you want to install. Once you check the box for the applicable update select the “Install” button.
Note-Downloading of the wiTECH diagnostic application may take several minutes depending on your internet connection speeds.
8.Please select “Next”.
9.This will launch the InstallShield installation process. Select “OK” to continue.
10.Select “Next”.
11.Select the Country or Region from the dropdown and select “Next”.
12.Select “I accept the terms in the license agreement” and select “Next”.
13.Select “Standard Install” and select “Next”.
14.Select “Install”.
15.The installation of the wiTECH Diagnostic application will begin at this time.
Note-This process can take several minutes to complete.
16.Once the install completes the following screen will be displayed. Select “Finish”.
17.To launch the wiTECH application, please use the desktop icon shown below.
Part 2:Crack wiTech Chrysler Diagnostic Software Guide
Witech Diagnostic Application software download, free
For crack wiTech software,it can not support update online.If you want to get update version,you need to contact you dealer and ask newer version. Commonly,them will sent the new version software on CD or provide you with download link.
And you also can try to use the newer wiTech on your interface,but you need try it at your own risk.
This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. The main popular diagnostic tools for workshop are:Vag COM, VAS5054A, GM Tech2, iProg+ Programmer, Orange 5 programmer, Scania VCI3, etc.
How useful was this post?
Click on a star to rate it!
Witech Diagnostic Application Software Download Mac
Average rating / 5. Vote count:
This Post: How to Update Original & Crack wiTech Chrysler Diagnostic Software From ChinaOBD2 Official BlogWitech Diagnostic Application Software Downloads
Please keep this link if you copy the post!
Tags: Car Key ProgrammercatCode Readerdiagnostic softwareECU Chip TunninggmiprogkeyKey ProOBD2originalprogramScania VCIvciwholesalewiTech MicroPod
Related Posts